Fully programmable to define a range of important and useful features that will help you optimize your radio installation.
A total of 140 degrees available, plus 25% programmable by transmitter, means that as much as 175 degrees of throw can be obtained.

So these servos not only guarantee as much control throw as you will ever need,

but are also perfect for retract and scale hatch installations.

Speed is adjustable from 1% to 100%, and 1% is VERY slow indeed!

Best of all is the prices.

No expensive programming box is needed to access all these useful features -

it is a simple cable you attach to your PC.

And when using the Hyperion Emeter V2, you will have field programming, too.

	HP-DS20UMD	HP-DS20FMD	HP-DS20HMD	HP-DS20GMD
Servo type	Fully programmable full size digital servo
Dimensions mm	40.0 x 19.5 x 37.8mm
Weight gram	53		49
Speed (sec/60 deg @ 4.8/6.0V)	0.23/0.18	0.17/0.13	0.15/0.11	0.07/0.05
Dynamic torque (kg/cm @ 4.8/6.0V)	11.6/13.8	7.0/8.2	3.6/4.7	1.6/2.0
Holding torque (kg/cm @ 4.8/6.0V)	20.9/23.5	14.0/16.4	7.2/9.4	3.2/4.0
Gear Train primary material	Metal
Bearing	Double ball
Programmable	Yes, with free PC software connected via USB adapter ( HP-HP-AT-PRGUSB)
Rotation in degrees	Adjustable 30 to 140 degrees total, 90 degree default (45 each way)
Adjustable travel speed	Yes, 1% to 100% of Rated Speed (100% default)
Maximum input voltage	Unloaded input voltage should never exceed 7.8V, loaded input voltage   max 6.25V